Horizontal Rip Saw For Flaw-Piece

This machine is specialized for horizontal sawing the remaining wood bark from log processing (only one datum surface is required). Taking the original section as base (this change the method of raising the wood bark and leaning process) and load the wood bark by laid flat through rubber conveyor. This method not only increase friction but also makes feeding more stable and safety. Easy operation, efficient and safe.

Introduction

详情-MJP142-30.jpg

This machine is a special machine tool for cross-cutting the leftover scraps (only one reference surface is required) from log processing.

Based on the original cross section, the original method of standing the material up and processing it with a backing plate is changed to laying the material flat.

Processing by conveying with a rubber conveyor belt not only increases friction, but also lays the material flat, making the processing process more stable and safe. The operation is simple, efficient and safe.

Serial NO. / Model	MJP142-09	MJP142-20	MJP142-30
Machine total power	32.2KW	33KW	40KW
Voltage / Frequency	3HP-380V,50HZ	3HP-380V,50HZ	3HP-380V,50HZ
Processing length	≥600mm	≥750mm	≥850mm
Feeding speed	0-32m/min	0-32m/min	0-32m/min
Processing width	≤90mm	≤200mm	≤300mm
Processing height	10-130mm	10-130mm	10-130mm
Appearance size (LxWxH)	2810 x 1180 x 1620mm	3200 x 1290 x 1620mm	3200x1460x1620mm
Product weight	1200KG	1200KG	1400kg
Blade Size	Φ230 x Φ50	Φ355 x Φ50	Φ450 x Φ50
Spacer Size	Φ120 x Φ50	Φ120 x Φ50	Φ120 x Φ50