Up and Down Multi Rip Saw For Log

Log Multi Rip Saw is for damp & dry raw wood that without the datum plane,which is developed by our company in response to the exploding market demands. Machine with thin saw kerf (50% of normal single-spindle multi rip saw for same log); flat and smooth sawing surface(replace planer); energy-saving and low waste due to the multi-blade design; high feeding speed and greatly improve efficiency.Fast & stable feeding,easy operation and high timber utilization, water cooling for longer life of saw blade and spindle.
Main application: woodworking industry, such as board making, laminated wood, floor board, packing case and pallet, as well as building trades.

Introduction

详情-MJY142-40.jpg

This machine is a special machine designed for longitudinal cutting of logs.

Its main features and performance are:

This machine has upper and lower saw shafts, so the saw blade is small and thin in diameter, which can process large diameter wood and save energy; the sawing surface is smooth, and sawing can be used instead of planing; multiple pieces can be cut at one time to improve work efficiency; automatic centering to improve the utilization rate of wood; the upper pressure wheel is active to increase the pulling force; the feeding is stable, and short, thick and difficult-to-process wood can be processed; the main shaft water cools the saw blade, removes fat and cools down, and prolongs the service life of the saw blade; it is easy to change the saw blade, and to change the processing specifications, just change the spacer without any adjustment.

Serial NO. / Model	MJY142-40
Machine total power	134KW
Voltage / Frequency	3HP-380V, 50HZ
Feeding speed	0-10m/min
Processing length	≥1400mm
Processing diameter	Φ200-400mm
Appearance size (LxWxH)	4780 x 2400 x 1660mm
Product weight	4000kg
Blade Size	Φ560 x Φ80
Spacer Size	Φ140 x Φ80
Extra Wood Conveyor	Optional, Can removable

Log Cutting Multi Rip Saw

圆木切割图01.jpg

Control Panel

The electric button controls the operation of the machine, and the operation is simple and convenient

Carbide Tip Circular Saw Blade

The circular saw blade is a circular saw blade with hard alloy tip, the tip is sharp, and both softwood and hardwood can be cut

V-shaped conveyor chain

The V-shaped transmission chain increases the friction between the chain and the log, and prevents the log from turning over while
ensuring fast transmission of the log.